 Dynamic
nozzles.
Our misting nozzles possess stainless steel or polycarbonate internal
shafts for superior atomization. The internal shaft acts as a secondary filter
and anti drip check valve. With nozzle installed facing above the horizontal,
on shutdown, the movable shaft drops and seats itself into the body to act as
a check valve.
Stainless steel orifice for durability, rigidity, corrosion resistance
and reliability.
Stainless steel results in a longer lasting misting pattern and nozzle life,
outlasting brass and plastic orifices many times over (e.g. polyacetal 4.5 times*).
Stainless steel orifices do not distort under high pressure as do certain plastic
types.
Modular Approach.
AmFog's modular approach with accessories, gives designers and users the ability
to achieve design and performance goals through greater flexibility.
|
Fine Atomization
Micro Physical Size
Micro physical size allows for placement
of nozzles into small
confined areas normally not possible with other
types of nozzles.
Unobtrusive Neat Appearance
Stainless Steel or Polycarbonate Core
Long Lasting & Robust
Low Cost
Hand Tightening
No wrench required for tightening or removal.
Hand tightening for ease of installation
and quick
maintenance saves time.
|
Self Sealing
O rings for leak proof seal. No tape or
sealant required.
High Pressure Anti Drip Capability
Specifically designed to fit and work with
ADP2/3/4/5 Series and SP Series for
optimum performance.
(See ADP Series and SP Series charts).
Ideal for Direct Pipe Insertion
Can be installed directly into rigid piping
or tubing of almost any size providing
there is adequate wall thickness.
No Extra Fittings Equals Lowers Installation Costs |
| |
MATERIAL |
APPROX. |
NOZZLE |
WT. PER/100 |
THREAD |
APPROX. DIA |
| |
ORIFICE DIA |
NUMBER |
gms/lbs |
SIZE |
Ht. Dia. |
| |
.15mm/.006" |
000015 |
272 / 0.61 |
10/24 UNC/2A |
|
| |
.2mm/.008" |
00002 |
|
| |
.3mm/.012" |
00003 |
|
|
.4mm/.015" |
00004 |
|
| .5mm/.020" |
00005 |
|
| .15mm/.006" |
000315 |
290 / 0.64 |
12/24 UNC/2A |
|
| .2mm/.008" |
00032 |
|
| |
.3mm/.012" |
00033 |
|
|
.4mm/.015" |
00034 |
0.43" x 0.38" |
|
.5mm/.020" |
00035 |
11mm X 9.65mm |
|
.15mm/.006" |
001015 |
260 / 0.57 |
10/24 UNC/2A |
|
|
.2mm/.008" |
00102 |
|
| |
.3mm/.012" |
00103 |
|
|
.4mm/.015" |
00104 |
|
| .5mm/.020" |
00105 |
|
| .15mm/.006" |
001315 |
272 / 0.60 |
12/24 UNC/2A |
|
| .2mm/.008" |
00132 |
|
| |
.3mm/.012" |
00133 |
|
| |
.4mm/.015" |
00134 |
|
| |
.5mm/.020 .4mm/.015" |
00135 |
|
* SOURCE: ENGINEERED MATERIALS HANDBOOK TM VOL. 2. ENGINEERING PLASTICS ASM
INTERNATIONAL
| 
;){kind=small}
;){kind=small}
