Technical

Nozzle Characteristics:

Spray Pattern:
Cone Shaped

Spray Characteristics:
Produces a high percentage of less than 50 micron size droplets at higher pressure ranges.

Spray Angle:
Orifice Degrees
0.15mm 45-60 deg.
0.20mm 55-70 deg.
0.30mm 65-75 deg.
0.40mm 80 deg.
0.50mm 80 deg.

Minimum Pressure Required:
Orifice
kg/Cm2
PSI
0.15mm
10+
150+
0.20mm
10+
150+
0.30mm
4+
60+
0.40mm
4+
60+
0.50mm
4+
60+



Flow Rates:



NOZZLE IDENTIFICATION AND FLOW RATES
COLOR ORIFICE Kg/cm 4 7 10 14 25 35 45 56 70 105
O-RING DIA PSI 60 100 150 200 350 500 650 800 1000 1500
   
  0.15mm LPM   0.023 0.026 0.033 0.036 0.043 0.046 0.05 0.076
  LPH   1.4 1.6 2 2.20 2.60 2.80 3.03 4.60
0.006" GPM   0.006 0.007 0.008 0.009 0.011 0.012 0.013 0.02
  GPH   0.37 0.42 0.51 0.58 0.70 0.75 0.80 1.20
   
  0.2mm LPM   0.028 0.033 0.046 0.048 0.056 0.066 0.070 0.081
  LPH   1.7 2 2.80 2.90 3.40 4 4.20 4.90
0.008" GPM   0.007 0.008 0.012 0.013 0.015 0.017 0.018 0.021
  GPH   0.45 0.52 0.75 0.77 0.90 1.05 1.10 1.30
   
  0.3mm LPM 0.028 0.036 0.045 0.048 0.063 0.068 0.078 0.088 0.093 0.116
  LPH 1.70 2.20 2.70 2.90 3.79 4.10 4.70 5.30 5.60 7
0.012"
 GPM 0.007 0.009 0.012 0.013 0.016 0.018 0.020 0.023 0.026 0.030
  GPH 0.46 0.59 0.72 0.77 1 1.08 1.25 1.40 1.60 1.65
   
  0.4mm LPM 0.045 0.051 0.070 0.085 0.108 0.116 0.126 0.140 0.150 0.165
  LPH 2.70 3.10 4.20 5.10 6.50 7 7.58 8.40 8.90 9.90
0.016" GPM 0.011 0.013 0.018 0.022 0.028 0.030 0.033 0.036 0.040 0.043
  GPH 0.71 0.82 1.10 1.35 1.70 1.85 2 2.20 2.40 2.60
   
  0.5mm LPM 0.056 0.07 0.083 0.088 0.113 0.133 0.15 0.158 0.165 0.166
  LPH 3.40 4.20 5 5.30 6.80 8 9 9.50 9.90 10
0.020" GPM 0.015 0.018 0.021 0.023 0.030 0.035 0.040 0.042 0.043 0.045
  GPH 0.90 1.10 1.30 1.40 1.80 2.10 2.40 2.50 2.60 2.70

 

HOME          PRODUCTS          TECHNICAL          ABOUT US          CONTACT

Copyright © 2008. Amfog Nozzle Technologies, Inc.
Amfog Nozzle Technologies
  HOME          PRODUCTS          TECHNICAL          ABOUT US          CONTACT